 |
| We used the spokeshave to plane down the edge of the Rudder. We did this in order to reduce drag. |
 |
| We used the thwarts (seats) from skiff #1 as a template, so we know which thwart is which, where it goes in the boat, and we know what size it will be. |
 |
| We were planing the extra wood off the edge of the thwart, (creating a chamfer) to make the thwart appear thinner. |
 |
| We cut out more foot stretcher brackets for skiff #1 and sanded them down. |
 |
| We clamped up the garboard plank without any glue to double check the placement. |
 |
| After we glued the cheeks on the Rudder, we sanded it to make it flush and clean up the glue. |
No comments:
Post a Comment