 |
| We are planing down the gain on the starboard side, getting ready for plank #4. On the port side, we are using a spoke-shave to plane down the land. |
 |
| After we glued Plank #4 on, we used a hand sander and an electric sander to smooth the hull of the boat. |
 |
| We are sanding down the plank to remove the high spots and prepping for filleting. |
 |
| In order to feel for the high spots on the planks, we closed our eyes and used our sense of touch. |
 |
| We are filleting the boat with epoxy using a Popsicle stick. We do this to reinforce the glue joints. |
No comments:
Post a Comment