 |
| We placed clamps on plank #3 for dry fitting. The reason we dry fit is to make sure we have the tools ready and the plank fits properly. |
 |
| We traced out the plank and made registration marks. |
 |
| We spread epoxy on the land of plank #2 . |
 |
| Also spread epoxy on plank #3 to prepare it for placement onto plank #2. |
 |
| We lined up the registration marks on planks #2 and 3. The next step is to clamp and wait for the glue to cure. |
No comments:
Post a Comment