 |
| My classmates and I are painting the skiff with a special coat of bottom paint to prevent algae and zebra mussels from growing on the underside of the boat. |
 |
| After bottom painting, we used a level to install the thwarts in the boat. |
 |
| We continued to install the thwarts in the boat. |
 |
| We installed the coxswain's seat and floorboard and the foot stretchers. |
 |
| We used the sander to sand down tabs on the sides of the board. |
 |
| We used a router to round over the edge of the rudder yoke. |
 |
| We finally put the finished boat in the water and went rowing. |
 |
| Still rowing with our oars, coming into the dock. |
No comments:
Post a Comment