Friday, February 22, 2013

Still Prepping. . .

We made cradles for when we flip the boat. We made two cardboard patterns to fit the boat at different spots where the frames were so there was enough support.  Then drew it on 3/4 plywood and cut 4 of them out using a jigsaw. Using a chopsaw we cut two 2x4's at different angles to make a semi circle.

We are resawing laminations for our outer stems using a bandsaw.

We made 10 laminations and dry fitted them to the boat stem which are way too long. Now you can see what the cradle looks like on the boat.

We are planing a chamfer into the gunwales.

No comments:

Post a Comment