 |
| We used the electric stander to sand the boat. |
 |
| Planing a bevel into the stern stem. |
 |
| We're gluing the keel together. |
 |
| Here's a close-up of our "clothes pin scarph" in the keel. |
 |
| We were planing down the keel after we glued it together. |
 |
| We're putting the keel on and marking where it hits the stem. |
 |
| We had to cut the scarph joint into the stem so there was more surface to glue where the stem and keel meet. |
No comments:
Post a Comment