 |
| We used a Skilsaw and a cut - off guide to cut the stem. |
 |
| This is a close up of our bow stem . |
 |
| Clamping on the bow stem with ratchet straps . |
 |
| A close up of the front of the boat . We scuffed up the inner stem using a razor knife . |
 |
| We're putting epoxy on the stem of the St. Ayles Skiff to glue on the outer stem. In the backround we are sanding our gunwales. |
 |
| Spreading epoxy on the stern to attach the outer stem. |
 |
| We used a chop saw to cut an angle into the front end of the keel. |
 |
| A close up of our scarph joint at the bow, where the keel meets the stem. |
 |
| Clamping on the keel using ratchet straps and C clamps. This was done in order for it to be straight and centered. |
Brilliant work, it really shows what you can do with the right tools and team work.
ReplyDelete